Da-Lite Viewshare tensioned Advantage Electrol Specifications download pdf (Page 7)

Transfer of Existing Motor (continued)

Figure 14

Figure 15

Tensioning

Cable Screw

Retainer

Clip

Motor

Plug

Wood

Block

9. Carefully lift the roller above the mounting bracket and remove

the Phillips head screw securing the tensioning cable to the roller

(Figure 14).

10. Remove the wood block and plug from the end of the

roller (Figure 14).

11. Insert previously set aside motor into the ViewShare fabric

and roller assembly.

NOTE: When transferring the existing motor into the roller,

be careful to avoid unintentional damage to the screen and

arm assemblies.

12. Re-secure the screen tensioning cable to the roller by replacing

the Phillips head screw.

13. Lower the roller, slide the bracket onto the motor end of roller

and insert retainer clip (Figure 15).

14. Align the motor end bracket using the mounting holes as

a guide and tighten the motor end arm bracket nut (Figure 13).

15. Re-attach the black L-bracket on the pin end of the roller (Figure 11).

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

No comments

Da-Lite Viewshare tensioned Advantage Electrol Specifications Page 7