Da-lite Large Advantage Electrol User Manual

INSTRUCTION BOOK FOR Large Advantage® Electrol®

10TroubleshootingVisit www.da-lite.com to ind installation and troubleshooting tutorials. You will also ind a link to Live Chat for interactive supp

11

LIMITED FIVE YEAR WARRANTY ON DALITE TENSIONED ADVANTAGE® ELECTROL®, ADVANTAGE® ELECTROL®, TENSIONED LARGE ADVANTAGE® ELECTROL®, LARGE ADVANTAGE®

2Important Safety InstructionsWhen using your video equipment, basic safety precautions should always be followed, including the following:1. Read an

3Tools Required for InstallationPre-Installation#2 Phillips Screwdriver 3/4“ Open Wrench or Socket Driver1. Carefully unpack case from shipping crat

4The case has a self-trimming lange around the bottom. Ceiling tiles or drywall may be placed on top of this lange to provide a inished appearance.

5InstallationVariable Position Mounting BracketsElectrical Junction BoxElectrical Junction BoxScreen RollerAccess DoorAudience SideSelf-Trimming Flang

6If your screen was shipped with the motor and roller already installed proceed to step 7.1. Remove the access door. First, remove the 2 bolts from

71. Place operating switch in “down” position.2. When the screen stops, turn the white “down” limit knob one-quarter turn counterclockwise (Figur

8120V Wiring Diagram NOTE: 2024 AWG wire recommended for connecting wall switch to low voltage controller. CAUTION: Do not use 3-position high vol

9240V Wiring Diagram NOTE: 2024 AWG wire recommended for connecting wall switch to low voltage controller. CAUTION: Do not use 3-position high vol