Da-lite Tensioned Contour Electrol User Manual

INSTRUCTION BOOK FOR Tensioned Contour® Electrol®

10

11

LIMITED FIVE YEAR WARRANTY ON DALITE TENSIONED ADVANTAGE® ELECTROL®, ADVANTAGE® ELECTROL®, TENSIONED LARGE ADVANTAGE® ELECTROL®, LARGE ADVANTAGE®

2Tools Required for InstallationNOTE: Carefully unpack screen. Use supplied 1/8" hex key to remove silver shipping brackets attached to slat and

3Installation (continued)1/4 X 5/8" Flat Head ScrewCeiling Hook BracketWall Mount BracketWall1/4 X 5/8" Flat Head Screw3. Make sure the

4Electrical Installation1. Open the junction box on the left end of the case using a #2 Phillips screwdriver. Install electrical connections that a

5Screen Adjustment for 120V Screens1. Remove the cover plate from the 3-button wall switch and remove the switch from the junction box.2. Locate sma

6RJ45ReceptacleRJ22 OutputRJ22 InputsUp (Dry Contact)Down (Dry Contact)Common (Both)Bus (Bus)5V (Bus)UPSTOPDOWNBUSCOM5VFront of Wall SwitchBusUPSTO

7RJ45ReceptacleRJ22 OutputRJ22 InputsUp (Dry Contact)Down (Dry Contact)Common (Both)Bus (Bus)5V (Bus)UPSTOPDOWNBUSCOM5VFront of Wall SwitchBusUPSTO

8240V Wiring DiagramIMPORTANT NOTE: The wall switch is REQUIRED to make any limit switch adjustments, EVEN if a third party control system is used. Th

9TroubleshootingVisit www.da -lite.com to ind installation and troubleshooting tutorials. You will also ind a link to Live Chat for interactive sup