Da-Lite IDEA Cart Installation Manual download pdf (Page 8)

22516 Installation Instructions

IDEA™ Screen Installation

1. Slide inner top frame (E) into outer top frame (F), making

sure screws on inner frame are aligned with holes on outer

top frame. (See Figure 7)

Figure 7

CAUTION: Do NOT touch back of IDEA™ screen during

installation or projection surface may be damaged!

2. Carefully slide IDEA™ screen into cart, inserting it into the

grooves at the back of the column extenders (J and K) and

making sure it is fully seated in the top groove of the screen

tray and cross assembly (D). (See Figure 8)

3. While holding the screen in place, set inner and outer top

frames (E and F) on top of screen. (See Figure 8)

Figure 8

4. Use four #10-24 x 3/8" Phillips machine pan screws (BB) to

secure outer top frame (F) to column extenders (J and K).

(See Figure 9)

5. Turn seven screws pre-installed on inner top frame (E)

counter-clockwise until screen is tightly secured. (See

Figure 9)

CAUTION: Do NOT overtighten screws or screen may be

damaged!

Figure 9

Projector Installation

CAUTION: Make sure knobs (R) are tightened prior to

installing projector to projector boom arm! Boom arm may fall

off if knobs are not secured.

1. Attach SSMU interface bracket to projector following SSMU

installation instructions.

2. Lower projector and attached SSMU interface onto RSM

plate on projector boom arm. (See Figure 10)

3. Slide projector with SSMU onto mounting slots in RSM plate

until mounting buttons are seated against the back of

mounting slots. (See Figure 10)

4. Move locking lever on RSM to "locked" position. (See

Figure 10)

5. Insert key into lock and turn to secure projector to mount.

Figure 10

(E)

(F)

(rear view)

(BB) x 4

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Da-Lite IDEA Cart Installation Manual Page 8

Comments to this Manuals

Related products and manuals for Projection screens Da-Lite IDEA Cart