Da-Lite IDEA Cart Installation Manual download pdf (Page 10)

22516 Installation Instructions

Adjustments

Height Adjustments

IDEA™ Screen

CAUTION: Make sure top frame is supported prior to

removing screws to prevent screen from falling during height-

adjustment!

1. Remove two screws connecting column extenders (J and K)

to each side column (H). (See Figure 15)

2. Adjust height of screen to desired height and line up holes

on column extenders with holes on side columns. (See

Figure 15)

3. Use two removed screws to reattach each column extender

to each side column at desired height. (See Figure 15)

Figure 15

Projector

4. Loosen two knobs (R) securing projector boom arm to

height-adjust beam. (See Figure 15)

5. Adjust boom arm height to desired height. (See Figure 15)

6. Tighten two knobs (R) to see arm at desired position. (See

Figure 15)

Projector Location Adjustments

Boom Arm Position

1. Loosen screws holding base bracket to projector arm. (See

Figure 16)

2. Slide projector along projector arm until desired projector

position is reached. (See Figure 16)

3. Tighten screws holding base bracket to projector arm. (See

Figure 16)

Figure 16

Lateral Shift

4. Loosen two screws on either side of the lateral shift plate.

(See Figure 16)

5. Carefully slide projector laterally until desired lateral

position is reached. (See Figure 16)

CAUTION: Do not slide projector too far to either side of

lateral shift plate or projector may slide off plate!

6. Tighten two screws on either side of lateral shift plate that

were loosened in Step 4. (See Figure 16)

(projector not shown

for clarity)

(projector not shown

for clarity)

1 2 ... 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Da-Lite IDEA Cart Installation Manual Page 10

Comments to this Manuals

Related products and manuals for Projection screens Da-Lite IDEA Cart