Da-Lite TENSIONED EXECUTIVE ELECTROL Installation Manual

DA-LITE SCREEN COMPANY, INC.3100 North Detroit StreetPost Office Box 137Warsaw, Indiana 46581-0137Phone: 574-267-8101800-622-3737Fax: 574-267-7804www.

PRE-INSTALLATION1INSTALLATION 1. Position screen under mounting location with the case opening down. 2. Install screen by raising unit into posit

The picture surface drop, and the opening and closing of the fabric door, are controlled automatically by limit switches which have been preset at Da-

1⁄4" x 2"LAG SCREWTENSIONED EXECUTIVE ELECTROL® INSTALLATION3SUGGESTED METHODS OF INSTALLATIONTYPE 1 & 2Offset mounting, recessed above

TENSIONED EXECUTIVE ELECTROL® INSTALLATION4BLACKRED (UP)BLUEBLACKWHITEWHITEREDUP LIMIT SWITCH(OPERATED BY DOOR)CAPACITORBLACK(DOWN)DOWN LIMIT SWITCHDO

TROUBLESHOOTINGSYMPTOM 1. Screen will not operate or will not go “down”. Motor does not hum. 2. Motor hums.CAUSE(a) Blown fuse.(b) Tripped

6TROUBLESHOOTINGSYMPTOM 3. Screen will not move “up.” Motor does not hum. Motor hums.CAUSE(a) No power between red and white leads in junct

TROUBLESHOOTING SYMPTOM 9. Screen jammed. Will not operate, motor hums, door open, closing mechanism detached from door.CAUSE(a) Closing mechanism