Da-Lite 22951 User Manual download pdf (Page 6)

22516/22951 Installation Instructions

Assembly And Installation

Cart Assembly

1. Use eight 5/16-18 x 2 1/2” button head cap screws (W) and

eight 5/16” washers (Y) to secure two side columns (H) to

leg and cross bar assembly (B). (See Figure 1)

Figure 1

IMPORTANT ! : If using side columns (H) for cable

management, install cable clips (P) to side columns prior

to installing column extenders to side columns. Square

nuts (V) will not be able to slide along the full channels if

extenders are already attached. See Cable Management

section for side column cable management installation

instructions.

2. Slide two column extenders (J and K) over side columns

(H). (See Figure 2)

NOTE: Make sure right column extender (J) is installed over

right column and left column extender (K) is installed

over left column.

3. Line up holes on extenders with holes on side columns at

desired mounting height. (See Figure 2)

IMPORTANT ! : Setting the mounting height at this point

is much easier than adjusting it after the screen has been

installed. Make sure column extenders are set at desired

height prior to installing screws in the next step.

4. Use two #10-24 x 3/8” Phillips pan machine screws (BB) to

secure each column extender (J and K) to corresponding

side column (H). (See Figure 2)

Figure 2

5. Use four #10-24 Phillips pan machine screws (BB) and four

1/4” washers (Z) to secure screen tray and cross assembly

(D) to column extenders (J and K). (See Figure 3)

Figure 3

(H) x 2

(B)

(Y) x 8

(W) x 8

(BB) x 4

(K)

(J)

(D)

(BB) x 4

(rear view)

(Z) x 4

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Comments to this Manuals

No comments

Da-Lite 22951 User Manual Page 6

Comments to this Manuals

Related products and manuals for Projector accessories Da-Lite 22951