Da-lite IDEA Screen User Manual download pdf (Page 4)

Wall Mounting Instructions for Screens with 24” Marker Tray

NOTE: The screen is shipped with two wall brackets. Screens in

widths of 84 ¾” and below receive (2) 28” wall brackets. Screens

above 84 ¾” in width receive (2) 44” wall brackets. Use

appropriate mounting hardware for the wall type and to

accommodate for the screen’s hanging weight (Figure 2).

1. Secure the two wall brackets to wall studs at the desired height.

The outside edge of each wall bracket must be no greater than

5” away from the left and right edges of the frame. You will need

at least 1” clearance above the drilled holes to hang the screen

(Figure 2) .

2. To install the (2) L-brackets, you must measure the overall height

of the screen frame and subtract 1⅛”. Using that dimension,

measure down from the top edge of the wall brackets and mark

the wall for two screw holes. The outside edge of each L-bracket

must be no greater than 5” away from the left and right edges of

the screen frame (Figure 2).

3. Secure the two L-brackets to the wall at the marked locations. The

longest side of the two L-brackets should be pointing upwards

when secured in order to hide the L-brackets behind the screen

frame once the screen is installed.

Wall Brackets

LBracket

No More

than 5”

No More

than 5”

No More

than 5”

Figure 2

Screws (Not Supplied)

1 2 3 4 5 6 7 8

No comments

Da-lite IDEA Screen User Manual Page 4